1000W 40A LiPo Battery SYNCHRONOUS Balance Charger Review

by:

RC Helicopter Parts

In response to high requirement of Lithium battery charging, SYNCHRONOUS Balance Charger adopts synchronous rectification technology with high efficiency. Different from the past chargers, this one allows users to set terminal voltage by themselves when connected to he PC. There are automatic charging current limit, capacity limit, temperature threshold and processing time limit, all of which make the charger safe to use.
SYNCHRONOUS Balance Charger
Generally speaking, SYNCHRONOUS Balance Charger employs the circuit that features output power of 1000 watts. It can charge or discharge up 20 cells of NiCd/NiMH or 8 series of Lithium batteries with maximum current of 40A. And the charger utilizes an individual-cell-voltage balancer, so there is no need to connect an external balancer for balance charging. Additionally, the charger employs a LCD screen which helps users to do lots of work.
SYNCHRONOUS Balance ChargerUsers can check battery’s total voltage, the highest voltage, the lowest voltage and each cell’s voltage via LCD screen. Besides, battery’s total internal resistance and each cell’s internal resistance can be checked with SYNCHRONOUS Balance Charger. With the LCD screen, users set as well as monitor charging data in line with personal need. And you can also control charging and update firmware through charge master.
SYNCHRONOUS Balance ChargerThe charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting. In addition, SYNCHRONOUS Balance Charger performs up to five cycles of charge-then-discharge or discharge-then-charge for refreshing NiCd and NiMH batteries. A high-precision temperature sensor keeps the battery in safe temperature, And the charge will stop once the battery reaches a specified temperature.

SYNCHRONOUS Balance ChargerFor some small batteries without main connector, you could use the battery socket to charge and discharge the battery to storage status. The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V. SYNCHRONOUS Balance Charger can be controlled and operated by smart phones if relative APP downloaded.

Share

Leave a Reply

Your email address will not be published. Required fields are marked *