In line with primary model copter enthusiasts need, DJI launched the most cost-effective flying control system DJI NAZA Lite. It is the simplified version of NAZA-M, but retains the reliability and stability of M version. You can not imagine such small module contains aseismic device, controller, three-axis gyroscope three-axis accelerometer and barometer and so on. It is the all-in-one design that realizes height locking and posture balancing and other functions. As you can see, the compact module is easier for installation with small body and light weight.
You may be curious how to make it better use for the copter flying. Here I will tell you the attitude algorithm ensures high stability and maneuverability, you can flexibly control your fly on condition that you get better known about working system of DJI NAZA Lite. First of all, the flight modes are divides into three kinds: GPS pose model, attitude model and manual model. You have to switch between the three modes according with a certain flying environment. But if you are a primary user, it does not matter if you could change modes flexibly, because the control system will automatically switch the mode when it gets environment change.
The control system is suitable for six different type of multiple rotor copter including copter with FPV function. As a matter of fact, DJI NAZA Lite has pretty accurate position locking and hovering function in the GPS mode, even if the wind is very strong, it still can make the copter hover stably in a relatively small circle. As for aerial enthusiasts, enabling the intelligent flying direction control function, you can shoot what you would not have expected in that is this mode the flying direction has no direct relation with the direction of head of the copter. So you must master how to neatly use the remote controller which has been closely connected with the flight control system.
For sake of safety of the copter, DJI NAZA Lite control system provide several protection mode such as out of control protection mode, low voltage protection and safe flying LED model. Many primary users have know ideal what is the best color to start a flight after the LED light shine, usually, you should fly the copter after three time shinning for both red, green, yellow light and four times green light. If the battery is under very low voltage, the poles LED light will turn red and shining in a high frequency, then you have to manually turn to the low voltage protection. At last, in case of bad condition of the aircraft or the long distance between aircraft and remote control, the control system provides one-print-home function on account of safety of the copter.