Emax TinyHawk 2 Review


RC Quadcopters


The Tiny Hawk 2 is the latest development of the TinyHawk series that evolved from Emax.

Emax put out the first Tiny Hawk two or three years back, the little Hawk S a year ago, and afterward the TinyHawk 2 in December 2019.

This robot shot upstanding into the highest levels of FPV robots of 2020 and you will perceive any reason why in the accompanying piece of this TinyHawk 2 review.

Emax tinyhawk2


Variant 2 of the Tinyhawk fixes several weaknesses of the principal rendition. Above all, the camera tilt is presently flexible. The camera has additionally been moved up to a Runcam Nano 2. By and by I would have favored a Runcam Nano 3, yet that should be simple enough to redesign. You can likewise stick some other Nano estimated Cam into the shelter.

It appears I had misfortune with my camera, I have earth on the sensor and several pixels on the sensor appear to be imperfect. I can fly with no issues; however, I actually notice them now and again. Call me punctilious, yet once I notification the earth on the sensor I can basically not unsee it. Yet, this is a simple fix – at any rate with the Runcam Nano 2, you can unscrew the focal point and cautiously blow the dirt out.

Motors, Frame, and Props

The outline has likewise been changed fundamentally – it is far tenser than the main adaptation, which was essentially round right around. The swaggers associating the engine to the loops are likewise a smidgen stouter. In my tests I have had many terrible accidents, however, the casing made do with no harm.

To oblige 1S and 2S batteries the battery confines now comprises of 2 elastic groups making sure about your batteries set up.

Emax tinyhawk2

LED’s have been included in the hoops, they are not programmable but rather are straightforwardly associated with the motor yields and the brilliance acclimates to the measure of choke. They look pretty extravagant in flight (particularly when it is more obscure) and are extraordinary on the off chance that you are planning to do some follow film or possibly draw with your quadcopter in a long presentation photograph.

The motors are as yet 0802 motors however now have 16000KV rather than the 15000KV of the archetype. They are not, at this point connected to the flight-regulator however rather straightforwardly welded to it, which is certainly not an awful thing in fact, since no force is lost at the fittings – the attachments are as yet accessible, however. I am not completely sure why this is.

The Tinyhawk 2 accompanies 40mm, 4 cutting edge props, and I had definitely no issues to flip over after an accident, even with 1S in spite of the fact that being on a smooth surface. This was fundamentally unimaginable with the first props the principal Tinyhawk accompanied.

Video transmitter

The VTX would now be able to be exchanged between 25mW, 100mW, and 200mW and arrives in a bolted state where just 25mW and a restricted choice of channels is accessible. Tragically this isn’t reflected in the VTX table arrangement, this implies you can at the present change to a recurrence that is really handicapped and is subsequently left in a state in which you have to interface with Betaflight to change your channel or set it by means of the catch on the video transmitter.

Emax tinyhawk2


The across the board flight regulator has been marginally redesigned with 5A ECS’s and you can run RPM channels and 48kHz by means of JESC on the Tinyhawk 2. The specific BLHELI_S rendition that Tinyhawk 2 comes streaked with is:

The flight-regulator comes streaked with Betaflight 4.1.0 (the objective is MATEKF411RX) and the tune is truly good. EMAX doesn’t prescribe to change the tune or move up to an alternate form since they guarantee their settings give the best presentation. Furthermore, I need to concede the Tinyhawk 2 flies quite incredible out of the container.


The SPI collector upholds D8 and D16 mode. I had a few issues with D16 mode on my Taranis X-Lite Pro. I got a ton of irregular RXLOSS, even at moderately short proximity.

What fixed it for me, was to change the PID and Gyro circle frequencies to 4kHz. Others appear to generally approve of the default settings of the Tinyhawk on D16. So perhaps this is only an issue with my arrangement. Inform me as to whether yours acts comparatively.

The Emax Tinyhawk 2 is significantly heavier than its archetype, coming in at 31.2g without a battery and 43.5g with a 1S 450mAh battery. On the off chance that you need to shed some weight a fast and simple way, is dispose of the LED.

Emax Tinyhawk2

Battery Options

For 2S you should have either a very enormous indoor space or fly it outside. Likewise, on the off chance that you need to fly on 2S, I would enthusiastically prescribe to trade the PH2.0 connector for an XT30 connector. At 2S the PH2.0 connector is actually a bottleneck.

In any case, not just on 2S, since EMAX chose to utilize the moved pin PH2.0 connector I would energetically prescribe overhauling it to a strong pin PH2.0 connector. This guarantees way better execution on 1S and the strong pin connectors are much tougher than their rolled or collapsed partners.

With stock settings and connectors, I get a flight season of around 4 minutes and 20 seconds on 1S. Outside I get a smidgen more than 3 minutes on 1S.

I didn’t care for the 2S battery inside so I just flew it outside and got around 2 minutes of flight time. I am almost certain you will improve results with an XT30 connector.

I incorporated a video with several demo flights. The initial ones are on default, out of the case settings, the keep going flight is on Betaflight 4.1.4 with JESC 48kHz and RPM separating empowered:



I can prescribe it to any individual who is searching for a 1S indoor racer. The stock tune is great, you can essentially remove it from the crate and begin tearing. You should change your rates, however.

In the event that you need to fly outside on 2S, I would not really suggest the Tinyhawk 2. Visit Banggood.com to purchase this wonderful piece of tech.


Leave a Reply

Your email address will not be published. Required fields are marked *