Mini coaxial helicopter Syma S107G for children& Entry-level Hobbyists

by:

RC HelicopterSyma

There is an old Chinese saying “ if you want to fly you have to walk steadily”. Today, I’m gonna introduce you Syma S107G, a mini coaxial helicopter which is specially suitable for children and new-in enthusiasts. According to pilots who have experienced the flight, this helicopter is super smooth and stable in all kinds of movements. You may keep reading if interested!

Syma S107G
With 220mm in length, 38mm in width and 98mm in height, the mini coaxial helicopter is super streamlined in structure. There is a durable canopy covering all components inner, which makes  Syma S107G safely survive crashes. Besides, the two main blades are made by nylon material of great tenacity. You may warp the blade but you couldn’t deform it! And considerate skid landing is provided too.
Syma S107GUtilizing flight control system with adjustable gyro, the 3CH helicopter Syma S107G is capable of three directions flying, respectively rising, descending, moving forward/backward, turning left/right and hovering as well. Small size as the helicopter is, it always shows you remarkably stable bearing. Mostly, it allows to well handle in windy outdoor! Even flying into wrong direction in windy outside, it will automatically correct its attitude.

Syma S107G
You may found it’s a little bit difficult to get started, but you’ll quickly master Syma S107G. At very beginning, you should slowly push the throttle stick up to make it fly higher, then you may releases slowly to lower it. You know, sensitive and smooth helicopter will keeps its smooth flight no matter for small or large amounts of position changes. For sure you will get it crashed into the wall or floor, but it will be safe and sound.

Syma S107G
Finally, Syma S107G ensures 6 to 8 minutes flight time supported by high-capacity Li-polymer battery. The remote distance is about 10 meters, allowing to fly both indoor and outdoor.

Share

Leave a Reply

Your email address will not be published. Required fields are marked *