SkyRC Charger Discharger, intelligent and compatible with all batteries


RC Quadcopters

SkyRC Charger Discharger is the small and upgraded version for well-known IMAX B6. Compared with B6, it has new features and functions with its super compact size. Smaller size, bigger power. Compared with B6, the power and charge current are 20% up. Let’s know more about it in the followings.

SkyRC Charger Discharger

SkyRC Balance Charger Discharger is compatible with many kinds of batteries.It is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium-Ferrum (LiFe) and Lithium-Ion (LiIon) batteries, maximum 6A charge current and maximum 60W charge power.

SkyRC Charger DischargerSkyRC Charger Discharger also comes with a little LCD screen. Through this screen, you can check battery’s total voltage, the highest voltage, the lowest voltage and each cell’s voltage. Besides, you can also know about battery’s total resistance, the highest resistance, lowest resistance and each cell’s resistance. All of these can let you master the whole charging process and ensure a safe using.

SkyRC Charger DischargerTo further make sure a safe charging, SkyRC Charger Discharger adopts a temperature threshold. If the temperature limit is reached, the process will be terminated. In addition, with built-in cooling fan, it has better heat transfer function. Moreover, it also offers functions of automatic charging current limit, capacity limit and process time limit, giving you maximum safety.

Last but not least, SkyRC Charger Discharger can be connected with PC to monitor pack voltage, cell voltage and other data during the charging. The real-time data will be shown with graphs, which is clear to see. The firmware of this charger can be also upgraded from APP of “charge master”. You can purchase the product by following this link.


Leave a Reply

Your email address will not be published. Required fields are marked *