Recently there emerges a large variety of FPV equipment, and some of you seems a little puzzle how to choose the right one. If you’re entry-level pilots without much experience, DJI Naza-M Lite all-in-one flight controller is very suitable for you. of course, the FC can satisfy pilots in higher level lack of time for installation or adjustment. Here we go to see how earthly the flight controller performs!

First of all, DJI Naza-M Lite ensures outstanding flight stability as well as maneuverability adopting the most advanced attitude stabilization algorithm. Generally, there are three control modes provided by the flight controller, respectively GPS attitude mode, attitude mode and manual mode. Pilots can freely switch between the three modes in line with personal experience to idealized flights.
When it comes to aerial photography, GPS mode should be specially mentioned. As for DJI Naza-M Lite, it provides plug and play GPS module which can greatly enhance performance in accurate position holding. Because of the module, position and altitude of multi-rotor aircraft will be accurately locked even in windy condition. For instance, Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
For new-in hobbyists, IOC mode will help you have access to fantastic flights. The flying direction usually is consistent with the nose. Under IOC mode, the flying direction has nothing to do with the nose wherever it points. Besides, DJI Naza-M Lite supports 2-axis gimbal system, which allows you to adjust gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.

Moreover, DJI Naza-M Lite provides fail-safe mode and return-to-home functions to make it safe at any condition. You can trigger the aircraft back to the takeoff place via the two features if the aircraft gets something wrong. In addition, the controller supports two levels low voltage protections: in the first level, the LED light will blank to warn you changing battery. In the second level, the aircraft will be forced to back takeoff place.
Additionally, DJI Naza-M Lite supports Futaba S-Bus and PPM receiver to optimize the channel connection, and A, E, T, R, U five-channel functions can be set by using channel X2. Pilots can simply connect the PPM or S-Bus to X2 with the controller via one servo cable. The flight controller supports six type of multi-rotor including Quad I, Quad X, Hexa I, Hexa V, Hexa Y, Hexa IY, which meets different needs of all hobbyists.