Nowadays more and more hobbyists tend to choose Class 250 frame, cause the FPV frame allows to fly at high speed. It is likely that we are witnessing the emergence of models to smaller dimensions. Thus the frame should equip a light weight mini camera like Eachine 700TVL 148º Camera. This is the case of video feedback kits that can multiply demonstrate a variety of aerobatics.
First of all, let’s take an overall look at Eachine 700TVL 148º Camera. It’s measured 3.2 inches square and 2.35 inches deep, with a target of 1.54 x 1.4 cm and 12g in weight. The camera is a 700 TVL, so high resolution in CMOS with a target of 2.6 mm for an angle view of 148º. Besides, there is a video transmitter with antenna included in the kit. You can quickly find the way and finish the installation.

When it comes the transmitter, it’s capable of transmitting on the 32 channels of the frequency band, and it also can be compatible with all of the receivers in 5.8 GHz. Additionally, all interfaces are seamlessly integrated into current widely used 5.8G diagram system, users can enjoy pretty high-definition and stable real-time broadcast after connecting Eachine 700TVL 148º Camera to the diagram system. And this is what we call first person view photography!

The transmission power is 200 MW, and it is limited to 25 MW in France. Eachine 700TVL 148º Camera supply voltage is 7 to 24V, which can be powered from a battery 2S 6S! The welded connector is a 4 pin to be connected to the balancing taking a 3S battery. The supplied antenna is rod-like, but you can replace it with one of your choice. And the transmitter dimensions are 3.8 x 2.25 x 0.6 cm and weighs 6 grams without antenna.

Last but not least, Eachine 700TVL 148º Camera doesn’t require much soldering. The small size makes it easy to install in the tiny space and small pipe, while the light weight allows it to be installed without causing any damage to the surface of the model. Compared with the same series products, it’s more able to put out clear and vivid images!