To get going, this Wltoys A959 RC car shows up well protected and packaged. This is conveyed pleasantly in a plastic pack, and the English in the manual is good, compared with a ton of other RC items having terrible English. The manual has charging info, just as a well spelt out parts list. The bundle likewise incorporates a helpful wheel hex, which can be utilized to replace or tighten the tires.
The following thing included is the charger. It accompanies an adapter, contingent upon where you are located.
The last thing included is the vehicle itself. It is around 25 cm long, as it is a 1:18 scale buggy. It weighs a little over a pound, so it isn’t excessively weighty. Practically the entirety of the segments are plastic. The body is removable, as it utilizes a pin setup to remain on the chassis. The vehicle quite lovely, as it is low to the ground and attractive with its blue color. Every one of the four wheels have oil-filled shocks, which due an incredible job of lessening body slap after jumps and decreasing vibration. It possesses a little front bumper, together with a sporty looking spoiler fixed on to the rear. The tires are rubber studded to help grasp the driving surface. They don’t have froth embeds. The engine is a 390 brushed motor, and to break it in.
The performance of the vehicle is the thing that truly stand out. Since it is four wheel drive, it can deal with short grass, and it has awesome acceleration as well as its handling.
In this guide we are going to be showing you how to upgrade your Wltoys A959 RC Car and bring out the beast in it.
Steps To Upgrading the Wltoys A959 RC Car
1. Purchase your new AUSTAR AX5 3CH 2.4 GHZ transmitter, a receiver brushless 3 channel, T plug to JST cable, gear upgrade metal, 17g analog servo, senseless 2435 4800KV brushless motor + 25A ESC
2. Using your screw driver, open up the cover of the RC car and remove the old brushed motor, receiver and servo.
3. Install the new gear metal followed by the newly acquired servo.
4. Restore the cover of the base car’s base and screw properly.
5. Place the new senseless brushless motor in its appropriate postion and attach the gear motor to its end. Ensure the gear motor lapse very well.
6. With the aid of a tape attach the ESC and connect the motor with the ESC.
7. Attach the new receiver after which you will connect the battery cable to the ESC.
8. Plug the servo to the channel 1 receiver and the ESC to the channel 2 receiver
9. Assemble the cover of the Wltoys A959 RC car and make sure the screw is tight enough.
10. Next is to test your upgraded RC car and you will surely love it.
Conclusion
There you go, that is how you can upgrade your A959 RC car. It doesn’t cost much to upgrade and all A595 parts needed for the upgrade is readily available at Banggood which is the global leading online shop; passion shopping on Banggood.
