Today I’m going to recommend 2.4GHz 7CH RadioLink T7F transmitter which is particularly designed for beginners. Adopting FHSS digital proportional system, the transmitter can detect the current spectrum channel to ensure the most stable signal transmission. Well, this transmitter made in China supports mots fixed-wing airplane and helicopter on the market. And it comes along with both English and Chinese menu as well as introduction.

Each transmitter has a unique identity code of its own, so the receiver can search and bind with the nearest transmitter while pressing the code matching button on it. There is no need to match again in future use once its matching successfully. FHSS technology endows RadioLink T7F with excellent anti-interference capability, helping the models always be in control easily. And the control range reaches 350 meters on ground and 700 meters in air.
As for ACRO mode, external switches operation includes dual rates(D/R), landing gear, trainer cord or “buddy-box” capabilities. And programming features includes servo reversing and E.P.Aon all channel, dual rates, exponential. Additionally, any one of four, factory-set, pre-programmed “wing-type” mixers including flaperon, V-tail, elevon mixing may be selected.
HELI mode: dual rate (D/R), Idle up, throttle hold, and gyro sense can be operated by switch. Too different gyro senses can be set with RadioLink T7F GY100 gyro on gyro function. Programming features include servo reversing and E.P.Aon all channels, dual rates, exponential, throttle curve, pitch curve, throttle hold and pit to rudder mixing. In addition, any one of two, factory-set, pre-programmed “swash-plate type” mixers can be selected.
What’s more, LCD displau provided by RadioLink T7F helps pilots a lot. The transmitter can interacts with the flight controller, and the feedback data are allowed to present via the LCD display in terms of telemetry function. For instance, battery voltage, altitude, weather, temperature, GPS and other flight data can be real-time monitored, which greatly reduce flight crashes.
Moreover, RadioLink T7F allows to store six groups of model data including control throw, trims, end points, etc to be stored in the transmitter and activated at any time, which eliminates the requirement for recording the transmitter each time you decide to fly a different model with it! Flying a model with wrong program will result in a crash, so always be certain the model name in the transmitter is correct! Have nice flights!