T-MOTOR AIR GEAR 350 AIR 2213 920KV Motor+ ESC+Propeller Set

When you decide to get your first DIY kit, you may simply Google search some advice. And enthusiastic netizens will suggest you to buy propellers, motors and ESC compatible with each other. Yes, they’re right! So here I wanna introduce T-MOTOR AIR GEAR 350, reliable as well as compatible DIY accessories!

The Motor

Nice Set, very well designed and well packed! the motors are top notch quality machined and also the magnets do make a nice impression. I spooled up the motors and ran some tests grounded with prop and tested all ESCs and was amazed by the response and smoothness (excellent balance and vibration control) all throughout the stick inputs.

Motors Specs:
Motor Type: AIR 2213
KV: 920KV(rpm/V)
Framework: 9N12P
Stator Size: 22 x 13 mm
Shaft Diameter: 4mm
Motor Dimension: 27.5 x 30 mm
Weight: 54g
LiPo: 3S~4S
No-load Current@10V(A): 0.5A
Max. Cont. Current(180 s): 18A
Max. Cont. Rating (180 s): 230W
Max. Efficiency Current: (3-10A)>83%
Internal Resistance: 132mΩ
Recommend the take-off weight :1.2 -1.5 kg
Motor Cable Length: 10cm (included the plug ‘s banana head)

Motor Features:
Adopts the integration propeller seat design,more convenient and simple installation
Self cooling technology effectively reduces operating temperature of the motor
Perfectly collocate T9545 self-tightening propeller
Suitable for many kinds of frame kit.
Low noise and fast response.

The ESC

The ESCs are very light weight small body, they do not have BEC tho (would have been smart to have at least 1 ESC with BEC or have a separate BEC device included. I didn’t have any problems with ESC and motor calibration on KK2.1 EVO flight controller.

ESC Specs:
ECS Type: AIR 20A
BEC Input: No
Power Supply:2S~4S LiPo
Continuous Output Current: 20A
Max. Momentary Current: 30A( not exceed 10 second)
Accelerator Signal Frequency: 600Hz
(When the  refresh rate exceed  500 hz the input signal is non-standard accelerator signal)
Dimension: 52.4 x 21.5 x 7 mm
Weight: 14g

ESC Features:
The signal frequency up to 600 HZ
The throttle response speed increase greatly
Ultra-low resistance field mosfets, performance better
Lighter weight,integration degree is higher

The Propellers

Props are well designed and seem to be well balanced. When you take out the prop nut self tightening, you can balance the props and you do not need special adapters like the DJI self tightening props requirement.

Propller Specs:
Propller Type: T9545
Pitch-row:12mm (M3)
Center Bore Diameter: 6mm
Thread Pitch: 9.5 x 4.5 inch (24.2cm)
Single Weight: 12g (include the screw cap)
Screw Cap: black: plus thread  (M6)
sliver-side black: reverse thread  (M6)
Rotation Direction : sliver-side black screw cap: clockwise
black screw cap: anticlockwise

Propller Features:
New materials, the use of high efficiency T – MOTOR propeller shapes
Three kinds of installation method is applicable to all motor in the market
(standard patten / paperbacked patten / self-locking patten)
Can also be applied to other models of motor series

If you are interested in checking the latest price and full details check the Product Page.

Share